Net weight: 212g Gross weight: about 350g (+ power cord)
Size: 90mm*88mm*35.5mm
Net weight: 212g Gross weight: about 350g (+ power cord)
Size: 90mm*88mm*35.5mm
Packing: upper and lower cover box + power cord
Color: 5 colors black-red-gold-silver gray-pink
Packing: upper and lower cover box + power cord
Color: 5 colors black-red-gold-silver gray-pink
parameter:
1. Power cord standard options: national standard + national standard with hole + American standard + European standard
2. Material: alloy
3. Input voltage: 100-230VCA, 50HZ-60HZ
4. Rated power: 23W
5. Maximum output: 2AMP-18V;
Instructions for use:
The device is a tattoo power supply, divided into input ports, output ports, the function operations are as follows:
1. Adjustment of output voltage: turn the knob clockwise to increase the set voltage, turn counterclockwise to decrease the set voltage, the voltage adjustment frequency is 0.1V increment/decrement;
2. Foot pedal working mode: lightly press the pressure regulating knob to switch the working mode of the foot pedal, the red light is on, and the continuous working state can be entered without stepping on, the red light is off, and the foot pedal is in the click mode;
3. There is a 4.8*7.0cm large magnet on the back of the power supply, which can be easily attached to various iron products, such as iron workbenches, hand brackets, tattoo beds and other iron furniture;
4. The power supply is not set with a switch key. After the power supply stops working, about 5 minutes later, the power supply automatically enters the dormant state to reduce power consumption. In the dormant state, all displays will be turned off. Turn the knob, press the knob or trigger the pedal The switch can wake up the power and enter the normal working state;
5. If the tattoo machine fails, the power supply will enter the protection state, and the display will be turned off briefly;
6. The plug can be configured according to the specified standard, which is convenient for use in different areas;
Product features
1. Imported circuit board, 2A output, stable performance;
2. Two control modes, which can control the pedal to work continuously;
3. There is no switch key, 5 minutes of non-working, automatic power off;
4. A large-area powerful magnet installed at the bottom can be easily attached to iron workbenches, tattoo chairs, hand brackets and other equipment;
For inquiries about our products or price list, please leave your email to us and we will be in touch within 24 hours.
© Copyright – 2023: All Rights Reserved.
We will contact you within 1 working day, please pay attention to our Email “[email protected]”.
We will contact you within 1 working day, please pay attention to our Email “[email protected]”.